1. Ensure that the shrink hood film is the correct size for the item you are packaging. Measure the item and select the appropriate size of shrink hood film.#ldpe film thermortractable 120micro#pallet heat shrink#shrink wrap bags for pallets
2. Place the item in the center of the shrink hood film. Make sure that the item is centered and that the film is not too tight or too loose.#y fold shrink wrap#pallet shrink wrap bag#pe heat shrink bag for pallet cover#heat shrink wrap pallet
3. Secure the shrink hood film to the item by using a heat gun or shrink tunnel. Make sure to keep the heat gun or shrink tunnel at least 6 inches away from the item to avoid damaging it.#heat shrink hoods#ldpe shrink wrap pallet cover#heat shrinkable#heat shrinkable film
4. Once the shrink hood film is securely attached to the item, use a sharp knife or scissors to trim off any excess film.
5. To ensure that the shrink hood film is properly sealed, use a heat sealer to seal the edges of the film.
6. When storing shrink hood film, make sure to keep it away from direct sunlight and extreme temperatures.#pallet cover shrinkable#large heat shrink wrap bags#shrink wrap plastic ldpe pallet#y-type shrink hoods#ldpe heat shrink sleeve film#shrink bag ldpe pallet
7. When using shrink hood film, always wear protective gloves and safety glasses to protect yourself from any potential hazards.
8. Make sure to dispose of any used shrink hood film properly. Do not throw it in the trash as it can be a fire hazard.